Enabling Devices 7511 User Manual

6. Activate this toy by connecting any capability switch to the unit via the
1/8" jack, located on the side of the unit. If you need to use a ¼ " to 1/8"
adapter for your switch, it must be a mono adapter, not stereo.
7. Make sure that the connections between the external capability switch
and the adapter (if applicable) and the jack on the Magical Light Show
are tight. There should be no gaps.
8. Begin play by activating the external capability switch.
art show has 36 different colored patterns. As the colored lights
change against a black background you hear upbeat music.
9. The Magical Light Show will continue playing while the external
capability switch continues to be activated. Once you release, all will
stop.
Troubleshooting:
Problem: The Magical Light Show does not work.
Action #1: Check or replace the AA batteries with fresh new batteries.
Action #2: Try a different switch that you know works with other
toys/devices to rule out the Magical Light Show as the source of the problem.
Care of Unit:
The Magical Light Show can be wiped clean with any household multi-
purpose cleaner and disinfectant.
Do not submerge the unit, as it will damage the contents and the electrical
components.
Do not use abrasive cleaners, as they will scratch the surface of the unit.
For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST)
1-800-TEC-TOYS or 1-800-832-8697
customer_support@enablingdevices.com
Magical Light Show with Mounting Arm -
The 6" spinning
#7511
USER'S GUIDE
50 Broadway
Hawthorne, NY 10532
Tel. 914.747.3070 / Fax 914.747.3480
Toll Free 800.832.8697
www.enablingdevices.com