Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for MS Schippers MS Fogger XXL
Summary of Contents for MS Schippers MS Fogger XXL
- Page 1 MS Fogger XXL...
- Page 2 MS Fogger XXL Fabrikant: Schippers Europe B.V. Smaragdweg 60 5527 LB Hapert © Copyright 2014 Niets uit deze uitgave mag worden verveelvoudigd en/of openbaar gemaakt worden door middel van druk, fotokopie, microfilm, geluidsband, elektronisch of op welke wijze dan ook zonder...
- Page 3 Content MS Fogger XXL Manual……............................4...
- Page 4 This machine has been designed for use with disinfecting agents supplied or recommended by MS Schippers. The use of other disinfecting agents or chemicals may adversely affect the safety of the machine. High-pressure jets can be dangerous if subject to misuse. Close distance to the ...
- Page 5 To ensure machine safety, use only original spare parts recommended by the manufacturer. Don’t use the machine if a supply cord or important parts of the machine are damaged, e.g. safety devices, high-pressure hoses etc. Switch off and unplug the machine when leaving it unattended, when finished ...
- Page 6 Preparation Before use, always inspect the machine and equipment for damages. In case of damages, act according to listed warnings. filling covers/lid (1- If the machine is dirty, clean it beforehand. In particular the and around them (on top of the plastic tank), so that unnecessary dirt in the tank wil be prevented.
- Page 7 Place the machine where it will be used, with a full tank it is more difficult to move. Close the rinse valve (2-3) and close the drain valve (2-4) before filling the tanks. Before filling the tanks, make sure the filling hose near the machine is clean of ...
- Page 8 Fill the main tank with the required amount of water according with the MS- level indicator (2-6) Schippers disinfecting agent specification. Use the leveling. You can place the filling hose in the holes provided for this in the tank opening to prevent the hose from slipping.
- Page 9 Startup Place the plug in an earthed socket. The red lamp under the tank will light up, this is a low pressure alarm. Make sure the place/room for disinfection is hermetically sealed. fan switch (3-1). With an EC motor fan it takes Switch on the fan using the off/on ...
- Page 10 Maintenance, inspection and repair Maintenance of the machine should always be done when starting up after a long time of storage. maintenance box (3-1) Replacing blocked nozzle, in the you can find spare nozzles and the nozzle tool to turn the nozzle of and on. Blocked nozzles can be cleaned with compressed air and/or in an ultrasonic liquid system.
Need help?
Do you have a question about the MS Fogger XXL and is the answer not in the manual?
Questions and answers