Alarm.Com ADC-VS121 Installation Manual

1 Channel Video Server (ADC-VS121) - Installation Guide
Required items for installation:
• Video Server and power adapter (included)
• Broadband (Cable, DSL, or Fiber Optic) Internet connection with router
• Personal computer or web-enabled tablet
• Login/Password for the customer's Alarm.com account
• Analog CCTV camera with power supply (not included)
• RG-59 or RG-6 coaxial cable with BNC connectors
• Ethernet cable
Install the video devices:
1. Use the coaxial cable to connect the analog camera to the BNC connector on the video server.
2. Use a standard Ethernet cable to connect the video server to the network router.
3. Connect the video server's AC adapter and plug it into a non-switched outlet.
4. From an internet-enabled device on the same network as the camera, add the video device to the account using
either MobileTech or by entering the following web address:
Website.
5. Follow the on-screen instructions to add and set up the video device. For more information about adding video
devices to an account, see
https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Video_Devices/1_Channel_Video_Server_ADC-VS121/1_Chan
Enroll the video device to the customer
www.alarm.com/addcamera
account.
Updated: Thu, 11 Apr 2019 14:59:12 GMT
to access the Customer
1