Do you have a question about the QGPGC and is the answer not in the manual?
Questions and answers
Summary of Contents for QGarden QGPGC
Page 1
Poly Garden Cart Model: QGPGC (150kg Max. Load Capacity) SAFETY AND OPERATING MANUAL SAVE THESE INSTRUCTIONS ASSEMBLY REQUIRED FOR YOUR SAFETY Please read & understand this manual, paying attention to the safety instructions, before use. Incorrect use of the product could put the operator or machine in danger.
Weight G.W 17kg – N.W 15kg Consistent with our policy of continuous improvement, QGARDEN reserves the right to change the design and configuration of any of its products without notice or obligation. Therefore, please treat the text and images in this manual as being for illustrative purposes only.
IMPORTANT INFORMATION INTENDED USE The QGARDEN Poly Garden Cart is designed for use in private gardens and primarily used around GRASS OR LAWN AREAS, but not in public facilities, parks or sports grounds and not for agricultural or forestry use. This product is not intended for commercial use.
GENERAL SAFETY INSTRUCTIONS Read and understand the owner’s manual and labels affixed to the product. Learn its application and limitations as well as the specific potential hazards. Retain these instructions for future reference. The operator is responsible for following the warnings & instructions in this manual and on the product.
Page 6
DRESS PROPERLY Do not wear loose clothing, gloves, scarfs, neckties or jewellery (rings, wrist watches), which can be caught in moving parts. Protective electrically non-conductive gloves and non-skid heavy-duty footwear are highly recommended when working. Wear a face or dust mask if the operation is dusty.
ASSEMBLY STEP 1 Turn the tub upside down. STEP 2 Assemble the Front Axle Bracket to the Front A-Frame, using 4x M8x20 bolts, 4x M8 nuts and 4x 8mm washers. STEP 3 Attached the Rear Axle Bracket to the Tub. Use 2x M8x20 bolts, 2x M8 nuts &...
Page 9
STEP 4 Place the Left & Right Rear Axle Braces over the axles of the Rear Axle Bracket and secure to the Tub, using 4x M8x20 bolts, 4x M8 nuts and 4x 8mm washers. Ensure the bolt and washers are fitted inside the tub.
Page 10
STEP 6 Attach the Lock to the Tub, using 4x M8x20 bolts, 4x M8 washer & 4x M8 nut. STEP 7 Attach the four wheels to the four axles. Please the large M12 washer after the wheel and secure using the M12 Lock Nuts STEP 8 Assemble the Handle to the...
OPERATION RAISING THE TUB To opertate the dumping feature, pull the dumping release handle outward to release the tub from the locking mechanism. Lift up the release handle to raise the cart into the dumping position. RETURNING THE TUB TO THE BASE Move the tub back down to the lowered position.
MAINTENANCE & STORAGE WARNING Improper maintenance & storage of the Trolley may void your warranty. LUBRICATE Maintenance spray or multi-purpose grease can be applied to the wheel axle prior to long- term storage. Oiling is not necessary. CLEANING After each use, thoroughly clean material out of the cart. Rinse/dry inside and outside of the Trolley after each use.
Page 13
PARTS DIAGRAM – QGPGC (1938148001) PARTS LIST - QGPGC (1938148001) ITEM ITEM PART NO DESCRIPTION PART NO DESCRIPTION QG114-1 QG114-10 Yoke TH140-2 Lock QG114-11 Wheel & Tyre QG114-3 Front Axle TH215-E1-21 M8x60 Bolt TH122-13 Coupling TH140-14 M8x20 Bolt QG114-5 Front Bracket...
Page 14
GJ HANDY & CO LTD USER WARRANTY POLICY Users Statement of Warranty Each new machine is warranted against defective material or assembly of material under normal usage. The warranty applies to the original purchaser and covers faulty parts and the labour involved in replacing and repairing those parts, which are of original manufacture.
Page 15
Not covered by this warranty a) The warranty policy does not cover any depreciation or damages caused by ordinary wear, rusting or corrosion, lack of correct maintenance or operation, misuse, abuse, lack of transportation or accident. b) The warranty policy does not cover any costs necessary for the standard periodic maintenance services instructed by the operator’s manual, or service parts replacement which would include oil, filters, tyres, belts, brake linings, fuses, blades, seals and other service parts unless it can be proven that the item has evidence of...
Need help?
Do you have a question about the QGPGC and is the answer not in the manual?
Questions and answers