Advertisement
Quick Links
LinkStar-STX3-ME
Easy Quick Start!
Place the LinkStar-STX3-ME™ outdoors with a clear view
1
of the sky...if you want to receive your transmitted data.
The LinkStar-STX3-ME needs an unobstructed view of the sky
Make sure the GPS antenna is pointing upwards
Make sure the radio antenna is pointing upwards
2
Plug in your AC adapter FIRST.
Do NOT plug in the USB cord to your computer first! It will supply
power to the LinkStar-STX3-ME computer, BUT it will NOT be enough
power for the radio transmitter!
3
You are communicating!
Once your GPS red light is flashing about once every 15 seconds, your LinkStar-STX3-ME
has a lock on is location (latitude, longitude and altitude), and it will begin to broadcast
packets of data in regular intervals you can define!
FCC ID: 2ANKS-LinkStar-STX3
Advertisement
Summary of Contents for Globalstar LinkStar-STX3-ME
- Page 1 You are communicating! Once your GPS red light is flashing about once every 15 seconds, your LinkStar-STX3-ME has a lock on is location (latitude, longitude and altitude), and it will begin to broadcast packets of data in regular intervals you can define!
- Page 2 LinkStar-STX3-ME Satellite Transmitter Next Steps… To talk directly to your LinkStar-STX3-ME you will need to ® ® configure your Macintosh or Windows PC computer to communicate over USB The computer of the LinkStar-STX3-ME is an Industrial BeagleBone Black Go to www.sci-zone.com/software/ software to download the appropriate...