Classic Accessories 78992 Instructions

Instructions: Fire Pit Cover
CAUTION!
Let your firepit cool before
you put your cover on.
Installation
Check your firepit to make sure there
are no sharp objects or corners that
could stress your cover as you pull
it on.
Use the handles located on either side
of your cover to slip your cover over
the top of your firepit then pull the
cover down around the firepit. To cinch
the heavy-duty fabric closed hold the
cord in one hand
and smooth the hem
of your cover back
away from you to
expose more cord to
pull out. Repeat as
necessary to adjust
Instructions: Fire Pit Cover
CAUTION!
Let your firepit cool before
you put your cover on.
Installation
Check your firepit to make sure there
are no sharp objects or corners that
could stress your cover as you pull
it on.
Use the handles located on either side
of your cover to slip your cover over
the top of your firepit then pull the
cover down around the firepit. To cinch
the heavy-duty fabric closed hold the
cord in one hand
and smooth the hem
of your cover back
away from you to
expose more cord to
pull out. Repeat as
necessary to adjust
to your firepit. If you
have the cover for
round firepits close
the click-it closures
around the legs to
secure your cover.
(Security straps are not included on
the square cover or stand-up cover)
Cleaning and Care
Clean your cover with a soft brush and
luke-warm water. DO NOT USE SOAP as
it may remove the protective coatings
added by the factory. Air dry.
Storage
To avoid any possibility of mildew
be sure your cover is completely
dry before you store it in an
enclosed area for a long period.
Three Year Warranty
This cover is factory warranted for
workmanship and materials for three
years after purchase.
to your firepit. If you
have the cover for
round firepits close
the click-it closures
around the legs to
secure your cover.
(Security straps are not included on
the square cover or stand-up cover)
Cleaning and Care
Clean your cover with a soft brush and
luke-warm water. DO NOT USE SOAP as
it may remove the protective coatings
added by the factory. Air dry.
Storage
To avoid any possibility of mildew
be sure your cover is completely
dry before you store it in an
enclosed area for a long period.
Three Year Warranty
This cover is factory warranted for
workmanship and materials for three
years after purchase.
There are four separate firepit covers;
one for square firepits, two for round
firepits and one for stand-up firepits.
Make sure you have purchased the
correct cover.
78992, 71942, 72942, 72952
There are four separate firepit covers;
one for square firepits, two for round
firepits and one for stand-up firepits.
Make sure you have purchased the
correct cover.
78992, 71942, 72942, 72952
08cH51_10555
08cH51_10555