Fig. 46: Installing The Compressor Casing; Table 39: Tightening Torque (72011) - ABB HT574289 Operation Manual

Operation Manual / 4 Product description / A130-H.. - A140-H
8 Dismantling and fitting / 8.15 Installing the compressor casing
Installing the compressor casing
Fig. 46: Installing the compressor casing
Part number A130 A135 A140
72011 M8 M10 M12
35 Nm 70 Nm 105 Nm
Table 39: Tightening torque (72011)
1. Fit a new, high temperature-resisting O-ring (42012, red or green) (see chapter Required
customer spare part set (97070) →87).
2. Thoroughly clean the fastening strips (72012) before assembly.
3. Attach swivel lifting eyes (01) to the compressor casing (72000) and lifting gear.
4. Install the compressor casing (72000).
5. Install the fastening strips (72012) with screws (72011).
© Copyright 2017 ABB. All rights reserved. HZTL4030_EN Revision D May 2017