Advertisement
HOW TO USE
Powering ON/OFF
Attach the pin of the supplied power adapter to the power
jack on the top of controller and plug the adapter into a
working wall outlet.
Turn the massager ON
Slide the Vibration setting to the Hi or Lo Position on the
controller.
Turn the heating pad ON
Move the Heat setting to the ON position on the controller.
Note: Use ONLY the power adapter that has been packaged
with this massager. Do not attempt to use other adapters.
CLEANING AND MAINTENANCE
Cleaning the Massager
Unplug the massager and let the heating
Unzip and remove the foot cover from the
pad cool down if just used.
massager, then unzip the bottom cover from the pad.
Wash the massager's cover by hand and
Use small amount of detergent.
let the cover air dry
Place the massager in a safe, cool and dry place when not in use.
DO NOT USE WASHING MACHINE OR CLOTHES DRYER ON THE MASSAGER'S COVER.
This can shrink/damage the covers. Make sure covers are completely dry before returning to the pad.
The massager internal pad CANNOT BE WASHED. Washing the pad will cause damage to massager's
pad and can potentially cause bodily harm to the user.
Advertisement
