Mode Switching; Diopter Adjustment; Indicator Light - Bresser TNS3 Instruction Manual

MODE SWITCHING

Press the [ ] key to switch between the imaging
modes of white heat, black heat, rainbow, hot
metal, yellow saturation and game/wildlife watch-
ing mode.
ZOOM IN/OUT
Shortly press the [
press it, the target of "1X, 2X, 4X" will be gradually
enlarged and displayed. In the manual or semi-au-
tomatic state, long press the zoom in button for 2
seconds to manually correct the shutter once.
BRIGHTNESS ADJUSTMENT OF THE DISPLAY SCREEN
Under the power-on state, press and the [ ] key to
adjust the brightness. Long press the [ ] key for
2 seconds to turn on or off the hotspot tracking
function.

DIOPTER ADJUSTMENT

Rotate the diopter adjustment key left and right
to adjust the diopter for yourself.
FOCUSABLE LENS
Rotate the focus lens key left and right to focus.
Rotate clockwise for near focus and counterclock-
wise for far focus.

INDICATOR LIGHT

Not being
Status
charged
Power on Blue
Power off None
APPLICATION OF AMPLIFICATION
The magnification function may be utilized when
remote objective is photographed so as to ob-
serve the objective clearly. The effect picture is as
follows:
Normal 2X
APPLICATION OF COLOR PALETTE
The palette menu can change the pseudo color
of infrared thermal image, and provide 6 color
palettes: rainbow, hot metal, white heat, black
heat, yellow saturation and game/wildlife watch-
ing mode. The selection of suitable color palette
can display details of the target. For rainbow and
hot metal color palette focuses on the display of
] key, and each time you
Fully
In charging
charged
Red blue
Blue
(purple)
Red None
4X
colors, so it is very suitable to high heat contrast
used to improve the color contrast between high
temperature and low temperature. Then the color
palette of white heat provides uniform linear
colors.
The image effect photographed with six types of
color palette.
Rainbow Hot metal
Yellow Game/Wildlife watching
10
White Black
heat heat