Arada Hoxton Fittings Manual

Arada Hoxton Fittings Manual

Log store & pedestal
Hide thumbs Also See for Hoxton:

Advertisement

Quick Links

Hoxton
Log Store & Pedestal
Optional Accessory Fitting Guide
PLEASE RETAIN THIS GUIDE FOR FUTURE REFERENCE
EN13240:2011 +A2:2004
BK 761
Rev 01
ISSUE DATE : 13/09/2022
22

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Hoxton and is the answer not in the manual?

Questions and answers

Summary of Contents for Arada Hoxton

  • Page 1 Hoxton Log Store & Pedestal Optional Accessory Fitting Guide PLEASE RETAIN THIS GUIDE FOR FUTURE REFERENCE EN13240:2011 +A2:2004 BK 761 Rev 01 ISSUE DATE : 13/09/2022...
  • Page 2 OPTIONAL LOG STORE & PEDESTAL FITTING INSTRUCTIONS Applicable Part Numbers — LOG-HOX-LOW / LOG-HOX-TALL PED-HOX-LOW / PED-HOX-TALL WARNING : Health and Safety Please consult health and safety guidelines for advice on handling heavy and / or large items. When lifting the appliance we recommend you always obtain assistance when handling. Extreme Caution is advised, due to the top heavy nature of this appliance.
  • Page 3 OPTIONAL LOG STORE & PEDESTAL FITTING INSTRUCTIONS STEP 2 To remove the direct air cover, you will need to remove the wheeled castors and 4x fixings as indicated below. The direct air cover can then simply be with drawn. Retain the castors and fixings in case of later use. STEP 3: With the stove safely resting on its back, also remove the 7x dome nuts as indicated below.
  • Page 4 OPTIONAL LOG STORE & PEDESTAL FITTING INSTRUCTIONS LOG STORE Specific Fitting Instruction : STEP A: With the appliance resting upon its rear surface (Step 1, page 2), position the log store assembly, against the appliance base, together with aligning the studs to the holes within the top of the log store.
  • Page 5 OPTIONAL LOG STORE & PEDESTAL FITTING INSTRUCTIONS PEDESTAL STAND Specific Fitting Instructions : To fit the pedestal stand, please follow steps 1 to 3. STEP C: With the appliance resting upon its rear surface (Step 1, page 2), position the pedestal stand assembly, against the appliance base, together with aligning the studs to the holes within the top of stand.
  • Page 6 Fixing Bracket holes. M8x75 Anchor bolt (Supplied) ** NOTE ** Drill Size 6mm Arada Ltd, The Fireworks, Weycroft Avenue, Axminster, Devon, United Kingdom, EX13 5HU Technical Help : +44 (0)1297 632052 BK 761 Specific Page 6...

Table of Contents