Advertisement
NOTE:
Remove all parts and hardware from the box along
with any plastic protective packaging and carefully lay all the
parts out on a clean, flat surface.
DO NOT discard any contents until after assembly and
installation is complete to avoid accidentally discarding small
parts or hardware.
Recommended Location for Use: Dry Indoor Environment
Assembly Time: 5 Minutes
People Required: 1 Person
PARTS
Check to make sure you have the following:
INCLUDED:
1- Lamp Base (A)
1- Lamp Shade (B)
1- Harp (C)
WARNING: In accordance with the UL Standard,
to reduce the risk of fire, the Shade should be open
1- Finial (D)
on the top and bottom. The Critical Radius (CR)
should not be less than 3".
Lamp Base
NOT INCLUDED:
1- 100 Watt MAX Type A Bulb
OR
1-25 Watt CFL Bulb
Shade
Lamp Shade
Harp
Critical
Radius
Page 2 of 3
Advertisement
