JVC GR-AX237UM Instructions Manual page 37

ORIGINAL TAPE (camcorder)
1 3
IN OUT IN OUT
EDITED TAPE (VCR)
STOP
2
IN OUT
EDIT
AUTOMATIC EDITING TO VCR
ENGAGE VCR'S RECORD–PAUSE
MODE
1
Point the remote control toward the VCR's infrared
sensor and press VCR REC STBY, or manually
engage the VCR's Record-Pause mode.
BEGIN AUTOMATIC EDITING
2
Press EDIT on the camcorder, and the previously
selected scenes are copied to the VCR in the
specified order.
END AUTOMATIC EDITING
3
When all selected scenes have been copied, the
camcorder and VCR enter the still or pause mode.
Press STOP on both units.
•When finished editing, be sure to disconnect the
editing cable and the audio/video cable.
NOTES:
If you performed step 1
CONNECTIONS"), keep the remote control pointed at
the VCR during editing.
The on-screen display only appears while the
camcorder searches for each scene.
There may be noise at in- or out-points on the edited
tape with certain VCRs.
EN
on page 35 ("MAKE
C
37