Advertisement
Quick Links
Advertisement
Related Manuals for Paugge ENT-SW20B4A
Summary of Contents for Paugge ENT-SW20B4A
- Page 1 Paugge ENT-SW20B4A 4K@60 HDMI Switcher 4×1 User manual VER:1.1...
- Page 2 Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. I. Introduction This is a high performance HDMI 4x1 switcher that supports HDTV formats up to 4Kx2K@60Hz and all HDMI 3D TV formats.
- Page 3 1 x Optical convert header (for SPDIF audio output) 1 x HDMI 4x1 IR Remote 1 x Operation Manual III. Features Compliant with HDMI 2.0a, DVI 1.0 standards. HDCP 2.2 and HDCP 1.4 compliant. Video formats up to 4Kx2K@60 and all HDMI 3D video formats. Support PCM, Dolby TrueHD, DTS-HD Master Audio up to 7.1CH Digital and analog audio output Support smart EDID management(Auto/2CH/5.1CH/7.1CH selectable)
-
Page 4: Specifications
IV. Specifications Frequency Bandwidth 18Gbps Input Ports 4 HDMI Female ports, 1 IR Receive port and 1 RS232 port Output port HDMI 1 HDMI Female port and 1 L/R & Optical port PCM 2 . 1 / 5 . 1 / 7 . 1 CH, Dolby 5 . 1 , DTS 5 . 1 , Audio Output Dolby-TrueHD, DTS-HD... - Page 5 V. Switcher Operation controls and Functions Front Panel: Input indicator LED, corresponding port LED will be illuminated when its port be selected. Auto manual select button: Press this button >2 seconds to select auto switching or manual switching mode. Under manual switching mode, short pressing this button to select input port. EDID status LED (Auto means using TV EDID).
- Page 6 function on/off button ARC status LED (this LED will be illuminated if ARC is enabled successfully) ARC Rear Panel: HDMI output port, connect with HDTV or monitor by HDMI cable HDMI input ports, connect with DVD, PS4 or Set-top Box by HDMI cable Audio output (including L/R analog and optical audio out) RS232 port...
- Page 7 IR Remote Press this button to enable or disable ARC function. Auto 2.1ch ARC LED on front panel will be illuminated if ARC function is enabled successfully. Press these buttons to select different EDID setting Auto Source Auto 2.1ch and corresponding LED on front panel will be 5.1ch illuminated.
- Page 8 VII. Application Example...