Advertisement
Title
Specifications of Lithium Ion battery (Prismatic Type)
4.6 Full Discharged
State Storage
4.７ Drop
STANDARD TEST CONDITIONS:
The battery used for the test mentioned above should be new one delivered a week before at
most. The test shall be performed at 25±2℃(Standard temperature of second grade adopted in
JIS Z 8703(Standard Test Conditions)), 65±20％(Standard humidity of twentieth grade adopted in
JIS Z 8703(Standard Test Conditions)). The grade of voltmeter and ammeter used in the test shall
be higher than class 0.5 adopted in JIS C 1102(Electric Indicator).
5. Design, Construction
A cell shall be of the design, construction and physical dimensions shown in the attached
drawing. (Drawing No. NUF103450P-49501)
6. Appearance
There shall be no such defects as scratch, rust, discoloration, dirt, deformation, leakage
which may adversely affect commercial value of the cell.
7. Shipment
The cell shall be shipped in about 30% charged state.
It is not specified more than 30% capacity remain at Nexcon Technology Co., Ltd.,
because of self discharge.
File No
UF103450-849
②After fully charged at 25℃, stored for 20days at
60℃ and rested at 25℃ for 3hours. Discharge
time is measured as specified in paragraph 4.2②.
Then next discharge time is measured as
specified in paragraph 4.2 ②.
After fully charged at 25 ℃ and discharged as
specified in paragraph 4.2 ② , then store for
20days at 60 ℃ and rest at 25 ℃ for 3hours.
Discharging time is measured as specified in
paragraph 4.2 ②.
After fully charged, at 25℃, the cell is dropped 3
times in random direction from a height of 1m onto
a flat surface of concrete.
Portable Rechargeable Battery Business Group
Energy Company, SANYO Electric Co., Ltd.
Lithium-Ion Battery Business Unit
page
4/13
30min. or more
40min. or more
50min. or more
No rupture,no fire
Advertisement
