Advertisement
Quick Links
FRUITY CHUTES
Skycat Drone Parachute Quick Start Guide
Thank you for buying the Skycat Parachute
Launcher Bundle. These resources are on our
website. Here are direct links to help you get
started!
WARNING: Be sure to go through each section
carefully. Let us know if you have questions. In the
event of an emergency, an improperly rigged parachute
can result in a crashed drone.
1. Complete the Trigger Board
Assembly – Do this after you
have assembled the mount so
you can trim the wires to the
optimal length. Soldering is
required: http://bit.ly/2BEcVP1
RECOVERY SOLUTIONS
2. Make the Skycat FUSE Links -
You will need the FUSE links
before you can pack and load
the parachute:
http://bit.ly/2nmTxSf
3. Pack and Load the Parachute
in the Skycat Canister:
http://bit.ly/2Gx2qAP
Fruity Chutes Inc. Monte Sereno, CA, USA
PROFESSIONAL
AEROSPACE
https://fruitychutes.com
Advertisement
Related Manuals for Fruity Chutes Skycat Drone Parachute
Summary of Contents for Fruity Chutes Skycat Drone Parachute
- Page 1 PROFESSIONAL FRUITY CHUTES AEROSPACE RECOVERY SOLUTIONS Skycat Drone Parachute Quick Start Guide Thank you for buying the Skycat Parachute 2. Make the Skycat FUSE Links - Launcher Bundle. These resources are on our You will need the FUSE links website. Here are direct links to help you get...
- Page 2 PROFESSIONAL FRUITY CHUTES AEROSPACE RECOVERY SOLUTIONS Skycat Drone Parachute Quick Start Guide (cont.) 5. Optional Product - Using the 4. Using the SATS-MINI failsafe: Skycat Rescue Radio: http://bit.ly/32su0ce http://bit.ly/326s8Lu Note: Unless otherwise indicated, SATS-MINI is shipped preconfigured for the Skycat If you have any questions, parachute trigger board.
Need help?
Do you have a question about the Skycat Drone Parachute and is the answer not in the manual?
Questions and answers