Important Safety Instructions - RiMO 070411 User Manual

IMPORTANT SAFETY INSTRUCTIONS

Read this manual completely before
using the wrench.
Wear safety goggles, user and bystanders.
To avoid damaging the wrench:
WARNING: Electrical Shock Hazard.
Electrical shock can cause injury. Handle is not insulated.
6
WARNING: Risk of flying particles.
Over torquing can cause breakage. An out of
calibration torque wrench can cause part or tool
breakage. Broken hand tools, sockets or accessories
can cause injury. Excess force can cause crowfoot
or flare nut wrench slippage.
Periodic recalibration is necessary
to maintain accuracy.
Never use this wrench to break fasteners loose.
Do not use extensions, such as a pipe, on the handle
of the wrench.
Check that the wrench capacity matches or exceeds
each application before proceeding.
Make sure the ratchet direction lever is fully engaged
in the correct position.
Verify the calibration of the wrench if you know
or suspect its capacity has been exceeded.
Do not force the head of flex head drives against
stops.
Always pull – do not push – on the wrench handle
and adjust your stance to prevent a possible fall
should something give.
Do not use on live electrical circuits.
GB