BGS technic 8612 Instruction Manual

Temperature Controlled Soldering Station
When using the soldering station for the first time, you are required to read the operation instructions
completely and carefully. In all the soldering work, you are supposed to obey the safety rules and
relating regulations.

GENERAL

This soldering station is an ideal soldering tool for an amateur fancier, school, car of electronics, and
for maintaining the service, producing with laboratory.
The soldering station is installed with electric soldering iron frame and the sponge for tidying up glue.
It is equipped with LCD digital temperature display which can display set temperature and factual
temperature simultaneously.
The housing has a compact design and provides good protection for built-in electronics.
The temperature is controlled by electronic circuit and electronic sensor.
Due the use of components with high efficency, the setting temperature is reached in a short time.
The electric soldering iron is supposed to work under safe and low electric voltage.
It has the precise function of regulating temperature, 1 degree or 10 degrees per grade can be
regulated through the temperature regulating button, also can control the temperature through 200℃,
300℃, 400℃ button and there is a convert button to switch ℃/°F.
The temperature range can be adjusted between 150°C and 450°C
Due the compensating electric outlet can be protected sensitive components.
If the operating is interruption, this will be shown by a warning in display and by a sound.

TECHNICAL DATA

Power supply voltage: 220 to 240volt (50Hz)
Electric iron power: 48 watt (24V)
Equipment power supply fuse: T1 A/250 volt 50 x 20mm glass pipe
Regulating scope of temperature: 150°C to 450°C
Temperature display: 2x 3 1/2 grades LCD display
Display scope: 150°C to 450°C
Display precision: 5%
Circumstance humidity: +5°C to +40°C, relative humidity 85% (not in humidification)
Atmospheric pressure: 600 hPa to 1000 hPa
Shell size: w210 x h125 x d135 mm (without electric iron)
Weight: about 1800g
SW-Stahl und Werkzeugvertriebs GmbH
L e v e k r u s r e t S a r s s e 6 5
D 4 - 2 8 9 7 R e m s c h e d i
Tel. +49 (0) 2191 / 46438-0
F ax +49 (0) 2191 / 46438-40
- E M a : l i n i o f @ s w s a t l h d . e
Art.8612