Advertisement
Quick Links
August 2021© Kubota B2301/2601 ROPS Cab Installation Manual
Kubota B2301/2601 ROPS Cab
* Cab is shown with optional equipment *
Kubota B2301/2601 ROPS Cab
This ROPS cab is designed and built to fit the Kubota B2301, B2601.
Designed and Built by:
Tektite Manufacturing Inc:
427 Buffalo Street
P.O. Box 639
Winkler, MB
R6W 4A8
Canada
PH: 204-331-3463
Fax: 204-331-4159
sales@tektite.ca
www.tektite.ca
One year standard product warranty provided by Tektite.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Tektite Kubota B2301 ROPS Cab
Summary of Contents for Tektite Kubota B2301 ROPS Cab
- Page 1 This ROPS cab is designed and built to fit the Kubota B2301, B2601. Designed and Built by: Tektite Manufacturing Inc: 427 Buffalo Street P.O. Box 639 Winkler, MB R6W 4A8 Canada PH: 204-331-3463 Fax: 204-331-4159 sales@tektite.ca www.tektite.ca One year standard product warranty provided by Tektite.
- Page 2 August 2021© Kubota B2301/2601 ROPS Cab Installation Manual Tektite Manufacturing Incorporated thanks you for purchasing a Kubota B2301/2601 ROPS cab! Tektite has worked very hard to design and build this ROPS product and we hope that it provides you with many years of ROPS protection.
- Page 3 August 2021© Kubota B2301/2601 ROPS Cab Installation Manual Parts List Standard Cab: Description Bolt, Flange, 5/8” x 1 ½”, Gr. 8, YD Nut, Flange, 5/8”, Gr. 8, YD Front Brackets (ALL CABS) L&R Bolt, Hex, 5/8” x 3”, Gr. 8, Yellow Washer, Structural, ¼”...
- Page 4 August 2021© Kubota B2301/2601 ROPS Cab Installation Manual...
-
Page 5: Installation Instructions
August 2021© Kubota B2301/2601 ROPS Cab Installation Manual Installation Instructions: 1. Remove upper hoop of the two-post ROPS from machine. Take care during installation as there will be a lot of pressure on the entire assembly. 2. Mark the wires going to both seat switches first, and then disconnect the wiring harness from both switches. - Page 6 August 2021© Kubota B2301/2601 ROPS Cab Installation Manual 10. Take the pre-upholstered under seat shield and roughly position it in the under seat area. Slide the wiring harness through hole in shield. Slide the upholstery slots around and through the levers in order to achieve a decent seal under the seat. 11.
- Page 7 August 2021© Kubota B2301/2601 ROPS Cab Installation Manual 13. For tractors equipped with no loader, take the provided left no loader bracket spacer and fasten to the tractor bell housing with the provided M12 x 35, M12 x 50 and M14 x 30 bolts provided.
- Page 8 August 2021© Kubota B2301/2601 ROPS Cab Installation Manual 17. Take the provided cab lift bolts, ½” x 4 ½” hex bolts and fasten to the mount nut located at the top of the door behind the tab. 18. Use a lifting strap or chain, and connect the two lift bolts together. Prepare to lift the cab up off of the shipping pallet with an over-head hoist or forklift.
- Page 9 August 2021© Kubota B2301/2601 ROPS Cab Installation Manual Front Bottom Hole 23. Ensure all fasteners have been started before any final torques are applied. For the 5/8” fasteners, you can apply 205 ft-lbs of torque. 24. Un-hook the lift bolts and remove the lift straps or chain. Remove the lift bolts, store if cab will be removed in the future.
- Page 10 August 2021© Kubota B2301/2601 ROPS Cab Installation Manual loop, shorten wire if necessary, then solder connector directly to red wire. Connect the heavy black wire to the ground bolt on the starter. Use the provided 1/4" loop, shorten wire if necessary, then solder connector directly to the black wire.
- Page 11 August 2021© Kubota B2301/2601 ROPS Cab Installation Manual 29. The heater hose will run through the open pocket on the right side floor board behind the factory floormat. Use a sharp knife and cut two X's into floormat in order to run the hose through the floormat.
- Page 12 August 2021© Kubota B2301/2601 ROPS Cab Installation Manual 35. Take the heater hoses and route towards the open ports where the bypass hose used to be located. 36. Use the provided HS-6 hose clamp to secure the first hose to the top port, cut any excess hose first.
- Page 13 This ROPS cab is designed and built to fit the Kubota B2301, B2601. Designed and Built by: Tektite Manufacturing Inc: 427 Buffalo Street P.O. Box 639 Winkler, MB R6W 4A8 Canada PH: 204-331-3463 Fax: 204-331-4159 sales@tektite.ca www.tektite.ca One year standard product warranty provided by Tektite.
- Page 14 June 2021© Kubota B2301/2601 ROPS Cab Operation Manual Tektite Manufacturing Incorporated thanks you for purchasing a Kubota B2301/2601 ROPS cab! Tektite has worked very hard to design and build this ROPS product and we hope that it provides you with many years of ROPS protection.
- Page 15 “as is” basis; c) wiper blades, light bulbs, fuses, clear vinyl or other consumables; d) glass where the point of failure has not been preserved intact and delivered to Tektite for analysis of the cause of the failure;...
-
Page 16: Safety Precautions
June 2021© Kubota B2301/2601 ROPS Cab Operation Manual Safety Precautions Safety First Read these instructions carefully. It is essential that you read the instructions and safety regulations before you attempt to assemble or use the features that are on this cab/ROPS. Danger: Indicates an immediate hazardous situation which, if not avoided, will result in death or serious injury. -
Page 17: Operating Safety
June 2021© Kubota B2301/2601 ROPS Cab Operation Manual General Safety 1. Never let an unqualified or untrained driver operate the tractor. 2. Keep a fire extinguisher, with ABC rating securely fastened in the ROPS. Maintain it and be familiar with its use. 3. -
Page 18: Maintenance Safety
June 2021© Kubota B2301/2601 ROPS Cab Operation Manual Safe Operation on Rough Terrain 1. Drive the tractor slowly on hillsides and curves to eliminate the danger of tipping. Avoid slopes which are too steep for safe operation. Avoid sharp uphill turns. 2. - Page 19 3. New ROPS decals and tractor decals are available from your tractor dealer. ROPS Safety 1. Install the ROPS in accordance with Tektite mounting instructions. Failure to do so may affect the ROPS ability to withstand a roll over. 2. If the ROPS is subjected to alteration, structural damage or involved in an over turn accident, the entire structure must be replaced.
- Page 20 June 2021© Kubota B2301/2601 ROPS Cab Operation Manual Operating Instructions Important The following section locates, identifies and briefly describes the functions of all cab controls. All operators should familiarize themselves with control location and function prior to operating the tractor. Failure to do so may result in unsafe operation of the tractor and possible injury or death to operators and bystanders.
- Page 21 Cab Circuit Protection The Tektite ROPS cab is wired to provide maximum protection against individual circuit overload. All optional components are fused internally behind the cab switch plate. Cab wiring is direct to the tractor battery. DO NOT leave options activated when tractor is not running as...
- Page 22 June 2021© Kubota B2301/2601 ROPS Cab Operation Manual After your ROPS Cab has been installed: Before starting a tractor equipped with a Tektite ROPS cab: 1. Clear the operator platform of all tools. Tools left in or around the ROPS and tractor can cause operator interference which could lead to bodily injury and/or damage the machine.
- Page 23 Daryl Furkalo 2020-01-27 transmitted. The material remains the property of specified Tektite and shall be returned upon request. The Checked By: Date: Size: material may not be reproduced or disclosed to third X.X =...
- Page 24 Imp. Daryl Furkalo 2015-09-23 transmitted. The material remains the property of specified Tektite and shall be returned upon request. The Checked By: Date: Size: material may not be reproduced or disclosed to third X.X = 1/16"...
- Page 25 Imp. Daryl Furkalo 2015-09-23 transmitted. The material remains the property of specified Tektite and shall be returned upon request. The Checked By: Date: Size: material may not be reproduced or disclosed to third X.X = 1/16"...
- Page 26 Imp. Daryl Furkalo 2015-09-23 transmitted. The material remains the property of specified Tektite and shall be returned upon request. The Checked By: Date: Size: material may not be reproduced or disclosed to third X.X = 1/16"...
- Page 27 Imp. Daryl Furkalo 2015-09-23 transmitted. The material remains the property of specified Tektite and shall be returned upon request. The Checked By: Date: Size: material may not be reproduced or disclosed to third X.X = 1/16"...
- Page 28 Imp. Daryl Furkalo 2015-09-23 transmitted. The material remains the property of specified Tektite and shall be returned upon request. The Checked By: Date: Size: material may not be reproduced or disclosed to third X.X = 1/16"...
- Page 29 Imp. Daryl Furkalo 2015-09-23 transmitted. The material remains the property of specified Tektite and shall be returned upon request. The Checked By: Date: Size: material may not be reproduced or disclosed to third X.X = 1/16"...
- Page 30 Daryl Furkalo 2020-01-27 transmitted. The material remains the property of specified Tektite and shall be returned upon request. The Checked By: Date: Size: material may not be reproduced or disclosed to third X.X =...
Need help?
Do you have a question about the Kubota B2301 ROPS Cab and is the answer not in the manual?
Questions and answers