Table of Contents
Advertisement
USER GUIDE
USER GUIDE
Free Standing Kit
Free Standing Kit
The free standing kit is an optional accessory, used when
unit is freestanding - not built into a cabinet.
Te free standing kit is an optional accessory
(ULAFREESTANDS), used when unit is freestanding - not
built into a cabinet. Available at u-line.com.
To install the kit:
1. Remove grille (see GRILLE INSTALLATION section).
To install the kit:
1.
Remove grille (see GRILLE INSTALLATION section).
2. Place shell accessory over front and back of cabinet
base, aligning holes of shell accessory with the holes
on the base. Insert sheet metal screw in back of base.
2.
Place shell accessory over front and back of cabinet
base, aligning holes of shell accessory with the holes
on the base. Insert sheet metal screw in back of base.
Free Standing Kit
Free Standing Kit
3. Align front hole with hole in shell accessory, hole in
3.
Align front hole wit hole in shell accessory, hole in
base, and hole in grille. Tighten screw.
base, and hole in grille. Tighten screw.
16
u-line.com
u-line.com
Advertisement
Table of Contents
Troubleshooting
