Table of Contents
Advertisement
4-2-2 How to Access Service Mode
1. General Remote
To Enter: POWER OFF
(Interval between key strokes: less than 3 sec)
To Exit:
POWER OFF
2. Factory Remote
To Enter: POWER ON
To Exit:
POWER OFF
Press the Factory key twice with a key stroke interval of more than 1 second (Pressing once enters Aging Mode)
3. Settings when entering Factory mode
- Sharp Screen (Dynamic), Color Tone (Cool1), Factory (Dynamic CE Off)
4. Adjustment Procedures
- Channel ▲▼ Key: Select an item.
- Volume ◀▶ Key: Adjust the value up or down.
- MENU Key : Save the changes to the EEPROM and return to the higher-level mode.
- Using the Numeric (0~9) keys, you can select a channel.
- Using the SOURCE key, you can switch AV modes.
5. Initial SERVICE MODE DISPLAY State
Option Byte
ADC
ADC Target
ADC Result
WB
WB_Movie
EPA Standard
BHP_VDEC
MST336C
BHP_DP
Sharpness
FBE3
Dynamic Contrast
LNA+
Expert Settings
※ The version of the firmware displayed at the bottom of the screen may differ and the firmware is subject to change for the
improvement of product functions.
※ If you have adjusted the settings in Service Mode, you have to reset the product.
Samsung Electronics
MUTE
1
8
POWER ON
INFO
Factory Key (Interval between key strokes: less than 3 sec)
POWER ON
Expert D-Settings
Expert Gray Scale
Expert C-Space
Expert Others
SOUND
PDP Option
Hotel Option
EDID
CHECKSUM
View Log
Font Data Viewer
2
POWER ON
T-TPZAUSC-0012
T-TPZAUSM-0004
RFS : T-TPZAUSC-2008012
2008-02-04
PANLE:50FHD
PN50A650T1FXZA
EDID SUCCESS
0000 1143 1000 1000 00c0 0000 00
CALIB : AV X COMP X PC X HDMI X
DTP-LM-0098
Date of purchase : 2/04/2008
Troubleshooting
4-9
Advertisement
Table of Contents
