JVC LS20C70BU Service Manual page 9

3.1.6 REMOVING THE LCD PANEL UNIT (Fig.4)
• Remove the STAND ASS'Y.
• Remove the REAR COVER.
• Remove the MAIN PWB SHIELD.
• Remove the MAIN PWB.
• Remove the INVERTER PWB.
(1) Remove the 5 screws [K].
(2) Remove the 2 claws [L], 2 claws [M] and 4 claws [N], then
remove the LCD PANEL UNIT and LCD BRACKET.
(3) Remove the 4 screws [P], then remove the LCD PANEL UNIT.
L
SPEAKER
Q
K
3.1.7 REMOVING THE SPEAKER (Fig.4)
• Remove the STAND ASS'Y.
• Remove the REAR COVER.
(1) Disconnect the connectors from the KEY PWB.
(2) Remove the 4 screws [Q], then remove the SPEAKER (L/R).
NOTE:
• It is advisable to take note of the connecting location (con-
nector number) of the removed connectors.
N
Q
[FRONT SIDE]
P
Fig.4
M
SPEAKER
P
(No.YA436)1-9