Advertisement
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
STEP1 TAKE OUT LEGS AND HARDWARE FROM THE BOX
UNDER THE SEATBODY.
STEP4 PUT THE CHAIR UPRIGHT AND MAKE SURE ALL LEGS
ARE LEVEL, THEN FIRMLY TIGHTEN BOLTS WITH ALLEN KEY
WHILE THE CHAIR IS UPRIGHT AS PICTURED ABOVE.
The legs and hardware are located in the small box underneath
STEP2 PUT THE WASHERS ON THE BOLT IN THE ORDER
SHOWN IN THE PICTURE.
STEP6 ZIP THE COVEVR ON BOTTOM OF SEAT.THIS ITEM
MAY REQUIRE PERIODIC TIGHTENING.
the chair in the zipper compartment.
STEP3 PUT LEFT CHAIR ARM AND RIGHT CHAIR ARM ONTO
SEAT BODY .SCREW IN THE BOLTS . BUT DON'T TIGHTEN
COMPLETELY.
Advertisement
