Tweeter Surface Angle Mounting Instructions - JBL 408GTI Installation Manual

Tweeter Surface Angle Mounting
Instructions
D
A
C
a) Using the Surface Angle Mount
Template at the back of the manual, drill
two screw holes at the desired mounting
location, making sure to choose the
correct tweeter orientation. Secure the
B
Surface Angle Mount Adapter with two 3 ⁄ "
4
sheet metal screws as shown in Figure G.
b) Secure the mounting plate to surface
angle mount adapter using two 5 ⁄ " screws.
1 6
c) Run the speaker wire from the 408 and
Figure G
508GTi Crossover to the wire through hole
TWEETER SURFACE ANGLE INSTALLATION
and connect the wire to the tweeter
making sure to connect + to + and – to –
by either soldering (preferred) or using
crimp-on connectors.
d) Push the tweeter down onto the
mounting plate making sure to line up the
bayonet tabs with the slots in the tweeter
housing.
e) Twist the tweeter clockwise about 1 ⁄ " to
4
lock it into position.
9