Kupo 070AC Quick Manual

I ntroduction:
Thank you for purchasing the Kupo Click Stands. To ensure
your safety as well as the proper use and maintenance of
your Kupo Click Stands, it is important to carefully read and
understand the information contained in this manual before
using.
Unpacking & Inspection
Open the shipping carton and verify that all equipment
necessary to operate the system has arrived intact and
make sure that there is no evidence of damage caused by
transportation. If any equipment is missing or damaged
please contact your nearest distributor immediately.
Cautions:
1. Light stand must be deployed on firm ground capable of
supporting the weight of both load and stand.
2. Do not exceed the maximum load capacity.
3. Do not operate the stand at temperatures more than +60
degree C or less than -30 degree C.
4. It's recommended not to move stand with raised columns
and a load.
5. Sand bags are recommended for increased stability and
securing the stand. Place sand bag on the leg brace or
on the stand leg.
6. Make sure everything is secure before proceeding.
7. Dry the product after using in wet conditions.
8. Use mild detergent and a soft cloth to keep the stands
clean.
9. In the event of product defects, please contact your nearest
Kupo authorized agent.
Should you require any further information, please contact
your nearest distributor directly - we will be pleased to
assist you.
www.grip.com.tw
www.kupogrip.com
070AC
min
78.5cm 213.36cm 71cm 4kg 70cm
1.1kg
30.9ʼʼ 7 feet 27.9" 8.8lbs 27.56"
2.42lbs
080AC
min
104.5cm
243.84cm 89cm 1.3kg
41.15ʼʼ
8 feet 35" 2.86lbs
5kg 109cm
11lbs 42.9"