Philips Perfect Care Performer GC8702 Service Manual page 13

Repair Instructions
5. Self-Check mode
Self-Check mode is NOT an exhaustive dianosis, but a quick preliminary check on all the hardware function.
5.1 The following to be carried out before Self-Check mode:
i) Power meter should be in-placed to monitor system power.
ii) Minimum water level in the water tank
iii)Make sure Soleplate is <100°C
5.2. Reset product to Factory Mode Test (FMT) Flow
V15
Published by Philips Consumer Lifestyle
Document No. : CSW-07-081-18056
GC8702 – GC8755 / HI8700 / RI8735
34 | 39 For internal use only