Subscribe to Our Youtube Channel
Related Manuals for Argos 626/8444
Summary of Contents for Argos 626/8444
- Page 1 EXTENDING METAL PET GATE care & instruction manual KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE Cat.No.: 6268444...
- Page 2 IMPORTANT! READ AND FOLLOW THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE Introduction Please read the instructions thoroughly to ensure proper installation. Please immediately inspect your safety gate upon receipt. If you see any damage, or additional parts are required for this gate, do not assemble gate and please go to back page of the instruction booklet for website or Consumer Relations Representative information.
- Page 3 If you need help or have any question, call the Argos Aftersales Helpline: 0345 640 2020 Cat.No.: 6268444...
- Page 4 TOOL REQUIRED Cat.No.: 6268444...
- Page 5 WARNING Don’t install a second gate above the first as there is a risk of serious injury or death. If the safety barrier is used If the safety barrier is used at the top of at the bottom of the stairs, the stairs, it should not be positioned it should be positioned at below the top level.
- Page 6 Before you begin, measure the opening to make sure your gate is wide enough for the entire opening. You could adjust the dimension of the gate with components (I 1), (I 2), (J 1) and (J 2). 23.62”-38.18” Cut the installation template following the dotted line. Stick the longer one (G) in one side of wall and shorter one (H) to the directly opposite wall.
- Page 7 diameter broach to drill holes on the remarked position. Drill 5 mm hole for the 6 marked positions, then put wall plugs (A), and use screw (B) to fix component (C) and (F). Adjust the gate width to fit the door width by bolts (K) and (L). Caution: please refer to page 9 to make correct length adjustment.
- Page 8 <1mm Locat amount Locate the 2 holes position before (E) to be amounted on the wall. Drill 5 mm holes, put wall plug (A), then use screw (B ) t (B) to fix component (E). Please ensure the spindle in the plastic groove and the bottom gap no more than 1mm.
- Page 9 34MM<L L<60MM L<60MM Use the tools provided to adjust bolts (K) and (L) to make the gate width to fit the door properly as below safety requirement: Caution: To ensure that this distance between each side of the gate and the wall is less than 60mm.
- Page 10 One-handed use, press down the button and lift the gate for two way opening. Use the tools provided to adjust bolt k to get smooth lock and unlock operation. Caution: Check the lock function before each use! Cat.No.: 6268444...
-
Page 11: Customer Care
Customer care Your child’s safety is your responsibility If you have a problem with this product or require replacement parts, please contact your nearest Argos store or telephone the Argos Customer Care Team on 0345 640 2020 Alternatively write to: Customer Care Team Produced in China.
Need help?
Do you have a question about the 626/8444 and is the answer not in the manual?
Questions and answers