JBL SCS 20 Important Information

IMPORTANT INFORMATION

REGARDING YOUR JBL SCS SERIES
SATELLITE SPEAKER WALL-MOUNT
1. When assembling the satellite speaker & the
speaker support into the wall plate (please see
page 5 of your owner's guide), please make sure
that at least ¼-inch or 6 mm of the wall plate metal
shaft is inserted into the support cavity. Please
continue to firmly press the support onto the wall
plate metal shaft until it is fully secured in place.
2. Please note that the satellite speaker, when
mounted on these brackets, can only be adjusted
horizontally (left or right). The speaker cannot be
adjusted vertically (up or down) or otherwise tilted.
Any attempt to do so will damage the speaker
bracket wall plate and/or support & such damage
will not be covered under warranty.
BRACKET