Philips HTS5540 Service Manual page 14

Dismantling of the SCART Board
1) Loosen 2 screws "O" at the back panel as shown in gure 17.
Dismantling of the JACK Board
1) Loosen 2 screws "P" on the top of JACK board as shown in gure 18.
Dismantling of the TOUCH Board
1) Loosen 3 screws "Q" on the top of TOUCH board as shown in gure 19.
SERVICE POSITIONS
Note:In some service positions the components or copper patterns of one board may risk touching its neighbouring pc boards or
metallic parts. To prevent such short-circuit use a piece of hard paper or other insulating material between them.
3 - 3
o
Figure 17
P
Figure 18
Q
Figure 19
3 - 3