Advertisement
Quick Links
Advertisement
Related Manuals for Manufacturas Lenin TACO
Summary of Contents for Manufacturas Lenin TACO
- Page 1 TACO MANUAL HEAD UNIT OPERATION’S MANUAL MEXICANTORTILLAMACHINE.COM...
- Page 2 The total or partial reproduction of this manual is prohibited by any means, whether printed or electronic; without the prior, express and written authorization ot the author. TACO MANUAL HEAD UNIT OEPRATION’S MANUAL VER. 2.0 · AUGUST 2022...
- Page 3 INDEX GENERAL SAFETY INSTRUCTIONS CAUTION COMPONENTS OPERATING INSTRUCTIONS CLEANING AND MAINTENANCE...
-
Page 4: General Safety Instructions
TACO MANUAL HEAD UNIT OPERATION’S MANUAL GENERAL SAFETY INSTRUCTIONS WARNING: To reduce the risk of injury, read all instructions properly. Failure to follow the instructions listed below can cause serious injuries, mutilation and/or damage to the equipment. A. SAFETY IN THE WORK AREA. - Page 5 TACO MANUAL HEAD UNIT OPERATION´S MANUAL CAUTION The following symbols indicate the safety measures that must be taken before and after starting up the equipment. TAKE CARE OF YOUR HANDS Hands should not be inserted while the machine is working.
- Page 6 TACO MANUAL HEAD UNIT OPERATION’S MANUAL COMPONENTS CUTTER ROLLER LEVER ROLLERS LEVER GEAR COVER THICKNESS ADJUSTMENT KNOBS SLIDE...
- Page 7 TACO MANUAL HEAD UNIT OPERATION´S MANUAL Check that the wire is tight Secure cutter lever. and that the straps rotate freely. Add approximately half a kilo of dough to the Spray grooves and straps with water rollers (not too much so that the curtain of...
- Page 8 TACO MANUAL HEAD UNIT OPERATION’S MANUAL Adjust the tortilla thickness by turning the adjustment knobs (clockwise to make the Release the cutter lever tortilla thinner, and counter clockwise to make it thicker) Straps Wire At the end of the day, carefully clean the rollers,...
-
Page 9: Cleaning Procedure
TACO MANUAL HEAD UNIT OPERATION´S MANUAL CLEANING PROCEDURE WARNING: Cleaning both the rollers and the base must be done with the machine completely stopped to avoid accidents such as crushing. FRONT ROLLER CLEANING 1. Remove the dough residues with your hands from the front roller at total stop. - Page 10 TACO MANUAL HEAD UNIT OPERATION’S MANUAL LUBRICATION The following table shows the parts, the type of lubricant and the frequency with which the machines and their parts must be lubricated. PIECE LUBRICANT PERIOD Chains SAE 40 Oil 3 times per week...
- Page 11 TACO MANUAL HEAD UNIT OPERATION´S MANUAL The following figures show the schematic location of the parts that require lubrication. Inject lubricant in the bearing Pour lubricant in bronze collars The following table shows the type of lubricant to put in all parts of the machine.
- Page 12 HEADQUARTERS AV. INDUSTRIAS #3655, ZONA INDUSTRIAL CP 78395 SAN LUIS POTOSÍ, SLP. MÉXICO 444 127 11 80 444 129 29 79 info@manufacturaslenin.mx MEXICANTORTILLAMACHINE.COM...
Need help?
Do you have a question about the TACO and is the answer not in the manual?
Questions and answers