2. Welcome Congratulations to your new kart! Yo decided to buy a high-end quality product from RiMO. Live the fascination of karting! 3. Usage This vehicle is to be used for business purposes only (e.g. rental business / pay and drive) or for event purposes and only to be used on tracks with solid ground, e.g.
7. Maintainance and inspection periods It is necessary that the maintainance is done regulary. RiMO suggests to use the maintenance checklist to guarantee the regularly maintenances. Please check chapter 8 for the checklist. RiMO suggests to complete the maintenance checklist carefully.
Page 7
8.2.1 Adjustment of the tooth belt/chain tensioner system The approach for chain drive equipped vehicles is identical. Belt tension lever with adjusting Fixing bolts for belt tensioner nut, counter nut and fixing bolt - untighten counter nut (1) - untighten fixing bolt of belt tensioner support (long bolt in adjustable lever) (2) DON´T remove the bolts, only untighten them - untighten fixing bolt of belt tensioner swivel for chassis mounting (3) - untighten fixing bolt of belt tensioner support (short bolt in pivot of adjustable lever) (4)
- replace the old brake pads against new and reassemble the brake in reverted order 9. Cleaning instructions RiMO recommends regularly cleaning of the vehicle. Tip: Use a steam blaster or simple purifier and a cleaning rag. Never use detergents which content thinners or acetone: these detergents could cause damages on the powder coated surface of the vehicle.
- it is recommended to use a ski mask for hygienic purposes. 12. Standard Engines RiMO trusts in the excellent and well-known quality of the Honda GX engines. These engines will guarantee a constant performance during an economic life time.
13. Adjustment and usage 13.1. Engine The gas cable system includes a protection spring to absorb excessive energy. This protects the system against mechanical damages in case of an accident where the driver presses the gas pedal with a multiple of his own weight while impacting.
- take care to mount the leading bar of the setting jig parallel to the tie rods (use a distancer, see right picture) - the steering wheel is to be locked in the middle position In case of any doubt or any technical question please don´t hesitate to consult RiMO staff: your technical questions will be answered competently.
- to reach the reference center turn the tie rods to the left and the right until the wheel lead is confirmed by the position of the indicator needles - afterwards tighten all bolts and nuts carefully - re-mount the front wheels (see chapter 8.3) 14.
Need help?
Do you have a question about the alpha and is the answer not in the manual?
Questions and answers