Vonci BT-270B2 User Manual

VONCI Commercial Induction Cooker
User Manual
Welcome to be the owner of VONCI induction cooker
Thanks for purchasing a VONCI product. This is the perfect
countertop burner for you! Please make sure that you have read
this user manual before using it. Please keep this manual
properly for reference at any time in the future. If you have
questions or need assistance about this cooker, please don't
hesitate to email us. We will provide the best service for you.
Email：VonciService@hotmail.com
Website: https://www.nenwell.com/
The VONCI Support Team
Ⅰ.Specification
1) Brand: VONCI
2) Supplier No.: BT-270B2
3) Item No.: VC-ICBS1-BT18W
4) Power Rate: 500W - 1800W
5) Voltage: 120V ~ / 60Hz
6) Temperature: 140℉-460℉
Ⅱ.Select Appropriate Mode That Satisfy Your Cooking Masks
1) If a specific cooking temperature is not required, we suggest using
Power Mode instead of Temperature Mode. To quickly bring a pot of
water to boil, use a higher power level setting. Similarly, for milk
heating , sauce cooking, etc., the Power Mode is also applicable.
2) For frying or sauteing food, Temperature Mode is preferred because
the built-in microprocessor monitors and regulates the cookware
temperature to the preset temperature.
3) If there is no cookware or an incompatible cookware is used, the
induction cooker will not detect the cookware and will beep. It should
be replaced with a compatible cookware as soon as possible,
otherwise it will automatically shut down after 1 minute.
Ⅲ.Usable and Non-usable Utensils
Please put a small household magnet on the bottom of the cookware, if the
magnet holds, the cookware is compatible. Cookware makes from cast iron, iron,
enameled steel or iron, or magnetic stainless steel work very well. If the
induction cooker does not work or beeps, it is usually caused by using a pan
with a non-magnetic bottom. In this case, please replace a pan with a magnetic
bottom.