bigboi BLOWR Instruction Manual

下单
145x210mm
2019 .7.20
INSTRUCTIONS

FOR USE:

Thank you for purchasing the Bigboi
Buddi Jnr. Before you start enjoying
the features and benefits of touchless
drying please take a minute to read
the below and familiarise yourself with
the dryer.

IN THE BOX

• Bigboi Blower Buddi Jnr
• 1 replacement filter
• 2 hose nozzles
Open the dryer box, take out the
dryer, and check its appearance, if
there is no damage, proceed with
the following steps:
1. Take dryer out of the box and
connect the desired nozzle in a
screwing motion, fastening the
nozzle to the unit.
2. Plug in the dryer (please make sure
the power supply voltage in your
country matches the machine);
3. Switch on the dryer to enjoy warm
filtered air with touchless drying.
For further information on any Bigboi products,
please contact sales@ibigboi.com

IMPORTANT NOTICE

This machine use AC power source,
1.
power must have good grounding
before used.
To maintain a smooth flow of air,
2.
please keep a safe distance from the
surface. This will allow the warm
filtered air to travel smoothly over a
larger surface making the drying more
efficient and preventing it from
taking in water which may damage
the machine.
Clean the filter regularly to ensure a
3.
smooth air flow.
Do not let minors close or play with
4.
the machine!

MAINTENANCE INSTRUCTION

1. The shell of the machine can be
cleaned with a soft cloth and neutral
detergent solution (to avoid spoiling
the paint work) then use a dry cloth to
clean it.
Use water or a strong fan to clean
2.
the filters regularly. Note that filters
must be dry before operating the
machine. The machine has a
standby filter packaged with it.
When the machine runs out of
3.
carbon brush, please contact a
professional to check and update the
required parts.
BIGBOI BLOWR
INSTRUCTION MANUAL
BLOWR BUDDI JNR
TOUCH LESS
CAR, MOTORCYCLE & MARINE
DRYER