Table of Contents
Advertisement
6.4 The rinse aid level
It is possible to set the released quantity
of rinse aid between level 1 (minimum
quantity) and level 6 (maximum quantity).
Level 0 deactivates the rinse aid
dispenser and no rinse aid is released.
Factory setting: level 4.
How to set the rinse aid level
Make sure the appliance is in user mode.
1. Press
.
• The indicators
,
and
• The indicator
• The display shows the current
setting: e.g.
– The levels of rinse aid range
from 0A to 6A where 0A
means no rinse aid is used.
2. Press
repeatedly to change the
setting.
3. Press on/off to confirm the setting.
6.5 Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic signal
is deactivated but it is possible to
activate it.
How to activate the acoustic
signal for the end of
programme
Make sure the appliance is in user mode.
1. Press
.
• The indicators
,
and
• The indicator
• The display shows the current
setting.
–
= the acoustic signal is
deactivated.
,
,
are off.
still flashes.
= level 4.
,
,
are off.
still flashes.
–
= the acoustic signal is
activated.
2. Press
to change the setting.
3. Press on/off to confirm the setting.
6.6 How to deactivate the
TimeBeam
Make sure the appliance is in user mode.
1. Press
.
• The indicators
,
and
• The indicator
• The display shows the current
setting.
–
= TimeBeam is activated.
–
= TimeBeam is
deactivated.
2. Press
to change the setting.
3. Press on/off to confirm the setting.
6.7 AirDry
AirDry improves the drying results with
less energy consumption. The appliance
door opens automatically during the
drying phase and remains ajar.
AirDry is automatically activated with all
programmes other than Rinse Hold (if
applicable).
The duration of the drying phase and the
door opening time vary depending on the
selected programme and options.
When AirDry opens the door, the display
shows the remaining time of the running
programme.
ENGLISH
13
,
,
are off.
still flashes.
Advertisement
Table of Contents
