Advertisement
1. Connect the unit directly to an appropriate wall socket outlet.
NOTE: This unit should only be plugged into a wall socket, not an extension lead. Ensure the
unit is positioned upright when plugged in.
2. The unit is controlled from the socket outlet, when plugged in and switched on the unit will
run continuously until switched off at the socket.
Clean the unit once every four weeks or sooner if required.
1. Ensure the unit is powered off and disconnected from the mains supply before cleaning.
Leave the unit unplugged for 2 minutes before cleaning and handling.
2. The unit should be cleaned gently with a clean dry brush or cloth. Do not use water to clean
the unit.
3. The collection tray at the bottom of the unit should be removed and emptied periodically.
Remove the tray by rotating it counter-clockwise and pulling it out (figures 1-3).
Figure 1
OPERATING INSTRUCTIONS
CLEANING AND MAINTENANCE.
Figure 3
Figure 2
Advertisement
