Advertisement
W
W
O L F
A R M I N G
I
N S T A L L A T I O N
4. Install rear side-to-side support rail
in the rear slots of warming draw-
er interior pan by following Step
#3. Make sure that tab size and
slot size are proportional.
5. Remove protective packaging
from front-to-back support rails.
6. Install front-to-back support rails
by sliding small tab into rear side-
to-side support rail and large tab
into front side-to-side support rail.
Make sure that the tab size and
slot size are proportional.
NOTE: Placement of front-to-back
support rails is dependent upon pan
needs. Refer to Illustration 2 to deter-
mine rail location and pan installation
combinations.
7. Place filler panel on right side of
support rail assembly. Insert large
tab into large slot on front side-to-
side support rail and small tab into
small slot on rear side-to-side
support rail.
8. Arrange pans to suit food storage
needs.
CAUTION
Use caution before touching Warm-
ing Drawer pans and/or lids; be sure
that the surfaces have cooled to
a safe temperature to avoid steam
burns.
CAUTION
Use dry pot holder when handling
as pan lids become hot when Warm-
ing Drawer is on and holds heat
after turned off.
Wolf Appliance Company, LLC
D
P
R A W E R
A N
I
N S T R U C T I O N S
COMBINATIONS WITH FULL SIZE PAN
Illustration 2
Use and Care for Warming
Drawer Pan Set
Before using your warming drawer
pan set, clean pans thoroughly with
hot water and a mild detergent.
Rinse and dry with a soft cloth.
Use the pan lids to keep moist foods
moist. Lids will also keep excessive
moisture from building up on interior
and exterior surfaces of warming
drawer.
¥
P.O. Box 44848
¥
Madison, WI 53744
S
E T
U
A N D
S E
A N D
COMBINATIONS WITHOUT FULL SIZE PAN
Do not use plastic wrap to cover hot
pans in the warming drawer . Plastic
wrap could melt and damage the
interior of your W olf Warming
Drawer .
IMPORTANT NOTE:
Never leave food in warming
drawer for more than two hours.
¥
800-332-9513
C
A R E
¥
www.wolfappliance.com
804626A
6/03
Advertisement
