Page 2
MRCOOL Electric Heat Kit ® 1. Remove the front panel and upper access panel from the air handler by removing the screws with a screwdriver. 2. Remove the screws holding the electrical box in place. Page 1 mrcool.com...
Page 3
MRCOOL Electric Heat Kit ® 3. Remove the electrical box and move it to the side. 4. Remove the screws holding the access panel in place. mrcool.com Page 2...
Page 4
MRCOOL Electric Heat Kit ® 5. Slide the electric heat kit into the opening behind the access panel removed in the previous step. (NOTE: The end of the heat kit has prongs which align with holes on the back wall of the air handler.
Page 5
MRCOOL Electric Heat Kit ® 7. Next, install the breaker. (NOTE: During the installation, you will need to lift up the buckle first. Then, hold the breaker bracket and put down the buckle to properly secure the breaker). 8. Connect the electric heat kit connector to the air handler wiring harness.
Page 6
MRCOOL® Electric Heat Kit MRCOOL Electric Heat Kit ® 8. Once the heat kit is securely mounted, refer to the wiring diagram on the electrical box and the electrical information contained within the air handler installation manual for the proper wiring instructions and procedures.
Page 8
Electric Heat Kit Due to updates and constantly improving performance, the information and instructions within this manual are subject to change without notice. Please visit www.mrcool.com/documentation to ensure you have the latest version of this manual.
Need help?
Do you have a question about the MHK U Series and is the answer not in the manual?
Questions and answers