Advertisement
Quick Links
CARE AND MAINTENANCE
Always use felt pads under allarticles to prevent discoloration or softening of the
lacquer. Plastic and rubber bases on items can discolor wood. Wipe up spills
immediately and avoid common hazards such as hot dishes,harsh solvents and
abrasives. Cleaning should be done with a soft lint free cotton cloth dampened with
water or furniture polish. On highly used surfaces we recommend applying a quality
paste wax which should be used on a regular basis to provide additional protection
from sratches and spills. How often you apply the wax depends on how much wear the
furniture receives.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
Part List and Hardware List
PIECE
DESCRIPTION
A1
Panel
Panel
A2
Panel
B1
B2
Panel
Metal frame
C1
Metal frame
C2
C3
Metal frame
Metal frame
C4
PICTURE
QUANTITY
1X
3X
3X
1X
1X
1X
1X
1X
Model# FOX4283
Product Dimensions:35-2/5"WX11-4/5"DX50-2/5"H
Advertisement
Related Manuals for Safavieh Furniture Louise Retro Mid Century FOX4283
Summary of Contents for Safavieh Furniture Louise Retro Mid Century FOX4283
- Page 1 CARE AND MAINTENANCE Always use felt pads under allarticles to prevent discoloration or softening of the lacquer. Plastic and rubber bases on items can discolor wood. Wipe up spills immediately and avoid common hazards such as hot dishes,harsh solvents and abrasives.
- Page 2 Allen bolt L M6X30mm Allen bolt S M6X20mm Screw Allen key Washer PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. Step 1 Step 2 Step 3 Attach the Screw(H3) to Panel(A1),Panel(A2) Attach the Metal frame(C1) to Panel(A1), using Allen bolt(H2) Attach the Panel(A2) to Panel(B1),using Allen bolt and washer(H1&H5)
- Page 3 Step 4 Step 5 Step 6 Attach the Metal frame(C2) to Panel(A2), using Allen bolt(H2) Attach the Panel(A2) to Panel(B1),using Allen bolt and washer(H1&H5) Attach the Metal frame(C3) to Panel(A2), using Allen bolt(H2) Tighten with Allen key(H4) Tighten white Allen Key(H4) Tighten with Allen key(H4) Attach the Panel (B1) to Panel (A2),tighten with philips driver Attach the Panel(A2) to Metal frame(C2),using Allen bolt(H2)