Download Print this page

North Star LW1200-REVO-PC-RGB Manual page 6

1200mm 36 led rgb wall washer

Advertisement

1200mm 36 LED RGB Wall Washer
LW1200-REVO-PC-RGB
Controlling System Use Manual (Online
Control) :
: : :
Features :
: : : R , G,B changes to produce different
brightness and 16 million different colors. With
computer, it can change and display lighting
effects freely.
Step ①
① ① ① Adjust each DMX address to cooperate
with the lighting effect and wiring method.
(Step ②
② ② ② When the signal wire is over 100m, use
signal amplifier to enhance signal and avoid
signal distortion.
Make sure to use end cap or
Step ③
③ ③ ③
waterproof glue on the first and last fixture
Not doing so will cause signal distortion or
dead fixtures
Step ④
User
responsible
for
④ ④ ④
preparation. 16 channels Modem for dry
location only. Each connector can connect 16
offline controllers at maximum, Need HSYV to
connect with next controller.
Step ⑤
⑤ ⑤ ⑤ ZA0001-001 8 channels DMX512 online
controller isn't waterproof , so it must put in dry
location only
Each connector can control 170
fixtures,1360s
altogether.
Need
connect.
Step ⑥
⑥ ⑥ ⑥ After setting the controller, use 2 pins
shield signal external wire to connect with next
fixture.
Step ⑦
⑦ ⑦ ⑦ Connect to power supply.
Remarks :
: : :
1) Over long distance connections may connect
with 2 pin shielded signal external wire.
2) Please refer to online controller use manual
for operation way and parameter.
North Star Lighting, Inc. 2150 Parkes Drive Broadview, IL 60155
Phone: 708-681-4330 Fax: 708-681-4006
www.northstar-lighting.com
8
C ontrolling System Connection Mode(Online Connection)
I
H
4
5
D
G
6
computer
C
3
D
HSYV
to
G
C
4
I
1 #
7
Address screen
1
1 7 0 #
1 #
1 7 0 #
Accessories and electical listing
Signal wire end cap
C
2 pins shield signal external wire
D
ZA0003-001 8 channels DMX512 online controller
G
16 channels Modem
H
I
HSYV
J
SDL-109A-T1 waterproof signal amplifier
2 #
1 6 9 #
2 #
1 6 9 #
Document Control #
J
2
J
6/6

Advertisement

loading