Specifications - JBL GTS100X Owner's Manual

Specifications
Continuous Power Output
34
(10Hz – 50kHz, 14.4V Battery Voltage, 80kHz filter)
Signal-to-Noise Ratio
Frequency Response
Damping Factor
Line-Level Input Sensitivity (for rated power)
Line-Level Input Impedance
Speaker-Level Input Impedance
Speaker-Level Input Sensitivity
Preamp Output Sensitivity
Minimum Speaker Impedance
Single Ended, Non-Bridged
Bridged
Built-In Electronic Crossover
Frequency and Slope
Power Requirement
Fuse Size
Size (L x W x H)
Weight
Speaker Input / Output Mating
Connector
Power Mating Connector
35 watts x 2 (4 ohms, 0.05% THD)
50 watts x 2 (2 ohms, 0.08% THD)
100 watts x 1 (4 ohms, 0.08% THD)
100dBA
10Hz – 50kHz (+0, – 1dB)
20Hz – 20kHz (+0, – 0.1dB)
>200
100mV – 4V RMS (500mV nominal)
10k ohms
15 ohms
200mV – 8V RMS (1V nominal)
2V out for 4V speaker-level input
2 ohms
4 ohms
80Hz, 18dB per octave low-pass filter
100Hz, 18dB per octave high-pass filter
11 to 16V DC negative ground
20 amp ATC-type fuse
6-5/8" x 9-1/4" x 2" (168.3mm x 235.0mm x 50.8mm)
4lbs. 3oz. (1.90kg)
Molex Mini-Fit Jr. # 39-01-2040
Metal pins: 39-00-0038
Plastic housing: AMP # 1-480700-0
Metal pins for ground & 12V: AMP # 350923-3
+
Metal pins for rem. in: AMP # 350536-1