Advertisement
Quick Links
R
AJ-24 SPEAKER STAND
Easy Assembly Instructions
May we take this
opportunity to thank
you for purchasing the
AJ-24 speaker stand.
We strongly suggest
that you carefully
study these assembly
instructions before
attempting to assemble
the unit, and that you
observe the listed
precautions.
Please read these precautions before assembling and using this unit.
1
Take care when unpacking to avoid damaging parts.
2
Do not overtighten the wood screws.
3
Do not use abrasive cleaners, use only a damp cloth to clean.
SUITABLE FOR SMALL TO MEDIUM SIZE SPEAKERS.
Contact the Acoustic Solutions Helpline on 01327 340601 for any replacement items. This line
is manned from 9:00am until 4:30pm, Monday to Friday.
CAUTION
DO NOT OVERLOAD THE STANDS.
REV: 1/046/1.3
Advertisement
Summary of Contents for RAX AJ-24
- Page 1 REV: 1/046/1.3 AJ-24 SPEAKER STAND Easy Assembly Instructions Please read these precautions before assembling and using this unit. May we take this Take care when unpacking to avoid damaging parts. opportunity to thank you for purchasing the Do not overtighten the wood screws.
- Page 2 Component parts and fittings contained in the box Remove all parts from the carton and inspect them. If you find any damaged or missing parts please contact the Acoustic Solutions Help Line on 01327 340601 for replacements. This line is manned from 9:00 am until 4:30 pm .
- Page 3 ASSEMBLY Group one top plate (A), one base plate (B) and two column side plates (C) together with 8 wood screws (as shown on page Using 4 wood screws, align the holes in the base plate with the pre-drilled holes in each column side plate.
- Page 4 ASSEMBLY Fit 4 spiked feet (E) into the holes in the bottom of the base plate. The spiked feet are threaded, it is necessary to screw them into the corresponding holes on the base plate. The spiked feet are optional, to provide isolation between the stands and the floor, as well as to provide stability on carpet.