Subscribe to Our Youtube Channel
Related Manuals for hermitlux HMX-DW04
Summary of Contents for hermitlux HMX-DW04
- Page 2 Safety and warning Tableware display Functions...
-
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS WARNING When using your dishwasher, follow basic precautions, including the following: a) Read all instructions before using the dishwasher. b) Use the dishwasher only for its intended function. c) Use only detergents or wetting agents recommended for use in a dishwasher and keep them out of the reach of children. - Page 4 1.Power socket must be grounded，avoiding to possible electric leakage or shock; 2.Don’t share one 7.6A / 10A socket with other appliance avoiding to fire. 3.An of new parts or power line will be changed by service man after damages； 4.Dispose of the machine in a environmentally friendly manner under local regurlations; 5.Do not place the machine in the enviroment under 0 °C, like outside door in clod weather；...
Need help?
Do you have a question about the HMX-DW04 and is the answer not in the manual?
Questions and answers
The machine will not push water to the arms to wash
If the Hermitlux HMX-DW04 dishwasher is not pushing water to the spray arms, possible issues could include:
1. Water Supply Problem: Ensure the water inlet is connected properly and the water source is turned on.
2. Clogged Spray Arms: The spray arms may be blocked by debris, preventing water flow.
3. Low Water Pressure: Insufficient water pressure may prevent water from reaching the spray arms.
4. Pump Malfunction: The washing pump (30W) may be faulty and not circulating water.
5. Blocked Filter: A clogged filter can restrict water flow to the spray arms.
6. Improper Detergent or Salt Use: Using incorrect products may cause buildup affecting water flow.
Check each of these areas to identify and resolve the issue.
This answer is automatically generated
Why does the water light come on when water tank is full
The water light may come on even when the water tank is full if the dishwasher is set to the "FET mode" (connected to a water inlet) instead of using the built-in tank. In FET mode, it expects water from the inlet, not the tank, so the light indicates no water is detected from the inlet source.
This answer is automatically generated