Austech Surveillance & IT SoloSafe User Manual

NSN SOLOSAFE

Charging your device:

The first time you use the device please ensure you charge it fully for 2-3 hours.

Using the USB charger or docking station to charge your device:

•
Place the device in the docking station
•
Connect the Micro USB side of the cable to the docking station port and connect the other
end of the cable to the supplied AC adaptor
•
Plug the adaptor into mains power

Switching the device on and off:

•
To turn the device on press and hold the ON/OFF button as shown in the above diagram for
1 second, all LED's will flash rapidly.
•
To turn the device off press and hold on the ON/OFF button and the SOS button together for
1 second until the LED'S are off.
**Note: It is important when first turning on the unit, to complete this function outdoors to allow
the unit to obtain a satellite fix**
USER GUIDE