Advertisement
Advertisement
Table of Contents
Summary of Contents for AQUABEVE Aqua Lavit
- Page 1 Aqua Lavit How to Calibrate Beverage Volumes...
- Page 2 Aqua Lavit Calibra7on • Step 1: Enter Calibra7on Mode To enter calibra7on mode: Press the “Lavit” and “S7ll Water” buGon simultaneously un7l an audible beep is heard and the halo around the dispense buGon turns green.
- Page 3 Aqua Lavit Calibra7on • Step 2: Select Stream to be Calibrated Select the stream to calibrate by first pressing the “Lavit” buGon. The select the stream to calibrate: S7ll Beverages – press the S7ll Water icon. Soda Beverages – press the Soda Water icon to select one of three streams. Press Once – SoO Press Twice – Medium Press three 7mes – Full...
- Page 4 Aqua Lavit Calibra7on • Step 3: Calibrate your selected stream Once you have made your selec7on: increase the pour volume by pressing the Lavit Icon. Each press of the Lavit icon increases the volume by approximately 15ml. Decrease the pour volume by pressing the Hot Water icon. Each press of the Hot Water icon decreases the volume by 15ml.
- Page 5 Aqua Lavit Calibra7on • Step 4: Save your Calibra7on SeWng Once you have calibrated your selected stream press the Green Dispense BuGon once to save your calibra7on seWng. You can then proceed to calibrate other streams by following Steps 2 thru 4 again.
- Page 6 Aqua Lavit Calibra7on • Step 5: Exit Calibra7on Once you have completed the calibra7on process, exit the calibra7on rou7ne by pressing the Lavit icon and the S7ll Water icon simultaneously un7l a loud audible beep and the dispense buGon halo turns Blue.
Need help?
Do you have a question about the Aqua Lavit and is the answer not in the manual?
Questions and answers