Summary of Contents for AQUARISTIK PRO CAL 80
- Page 1 PRO CAL 80/150/400 C a l c i u m Re a c t o r Setup Guide PUMP WARRANTY REACTOR WARRANTY www.sraquaristik.com...
- Page 2 STEP 1 Calcium Reactor Body Construction Install pump to the reactor. Connect the bottom arm plumbing Connect the top arm plumbing Connect the arm plumbings STEP 2 Adding Calcium Reactor Media Wash and add media Add plastic separator on top www.sraquaristik.com page 1 of 4...
- Page 3 STEP 3 Co2, pH, and Recirculation Connections CO2 connection Recirculation pH probe STEP 4-A For DC Pump Set Up Output connection to sump w/ valve Pump Input Connection Fine adjustment valve to sump Recirc. pump Input pump Adjust the amount of water set to 15%~30% set to 1%~5% coming out from the reactor...
- Page 4 STEP 4-B For Peristaltic Pump Set Up Peristaltic Pump Input connection from sump w/ valve Recirculation Pump Reactor to pump Pump to sump set to 15%~30% Fine adjustment valve is not necessary as water is being controlled through the peristaltic pump www.sraquaristik.com page 3 of 4...
- Page 5 STEP 5 Dialing in Reactor pH controller Calcium Reactor full setup set to 6.4 ~ 6.1 set CO2 to 40psi Your setup is now ready to use! www.sraquaristik.com page 4 of 4...
Need help?
Do you have a question about the PRO CAL 80 and is the answer not in the manual?
Questions and answers