Related Manuals for Njoy SNMP Card PM Lite
Summary of Contents for Njoy SNMP Card PM Lite
- Page 1 SNMP Card PM Lite ACUP-SN000MP-CG01B User manual 151.0 Before using this product, carefully read all product documentation and retain it for future reference.
- Page 2 4-2. Reset to Factory Default Setting / Recover from a Lost Password ..9 prevent data loss in the event of power problems. 5. Troubleshooting ....................10 nJoy UPS models that are compatible with this product: Aster Series 1K / 2K / 3K Argus Series 1.2K / 2.2K / 3K...
-
Page 3: Product Overview
Product overview Installation Step 1. Hardware Installation 2-1. Front Panel PMCARD 1. Remove the two retaining screws from the expansion slot and remove the cover. 2. Install the Power Management Card into the expansion slot. 1. Universal port 3. Insert and tighten the retaining screws. 2. - Page 4 7. You will need to enter a User Name and Password for the Power Manage- ment Card in the authentication window, as shown in Figure 3. Default user name: admin Default password: admin Figure 1. The main window of the “Power Device Network Utility” program. 4.
- Page 5 Method 2: Using a command prompt You will be asked to reset a username and password upon the first login. The 1. Obtain the MAC address from the label on the Power Management Card. administrator can access all functions, including enable/disable the view only Each Management Card has a unique MAC address.
-
Page 6: Troubleshooting
Troubleshooting Problem Solution 1. Check the LED status, it is normal when the yellow and green LEDs are both on. If green LED is off: Check if the Power Management Card is Unable to configure properly seated in the device and the device the Power has power.