Removing The Transport Struts - Bosch WAX32M40SG User Manual And Installation Instructions

en Installation and connection
Unscrew and remove
2.
screws for the transit bolts with a
WAF 13 wrench.
2
Pull the power cord out of the
3.
holder.
Remove the four sleeves.
4.
16
all four
1
Put on the four cover caps.
5.
Press down on the four cover
6.
caps.

Removing the transport struts

Note: Please read the information in
the Safety → Page 4 and Preventing
material damage → Page 11 sections
to ensure that you use the appliance
safely.