Table of Contents
Advertisement
7 Update software
Philips continually tries to improve its products.
To get the best features and support, update
your home theater with the latest software.
Compare the version of your current software
with the latest version on www.philips.com/
support. If the current version is lower than the
latest version available on the Philips support
website, upgrade your home theater with the
latest software.
Caution
•
Do not install a lower version of software than the
current version installed on your product. Philips is not
liable for problems caused due to software downgrade.
Check software version
Check the version of the current software
installed on your home theater.
1
Press
(Home).
2
Select [Setup], and then press
3
Select [Advanced] > [Version
information].
» The software version is displayed.
•
'System SW' displayed indicates the
overall software version. 'Subsystem
SW' indicates the version of different
features. For example, if 'Subsystem
SW' is '35-00-00-05", the last two
digits ('05') indicate the current version
of the onscreen help installed on your
home theater.
Update software through
USB
What you need
•
•
•
Step 1: Download the latest software
1
2
3
4
5
.
6
Step 2: Update the software
•
1
A USB flash drive that is FAT or NTFS-
formatted, with at least 100MB of memory.
Do not use a USB hard drive.
A computer with Internet access.
An archive utility that supports the ZIP file
format.
Connect a USB flash drive to your
computer.
In your web browser, go to www.philips.
com/support.
At the Philips Support website, find your
product and locate the Software and
drivers.
» The software update is available as a
zip file.
Save the zip file in the root directory of
your USB flash drive.
Use the archive utility to extract the
software update file in the root directory.
» The files are extracted under the UPG
folder of your USB flash drive.
Disconnect the USB flash drive from your
computer.
Caution
Do not switch off the home theater or remove the
USB flash drive during the update.
Connect the USB flash drive containing the
downloaded file to your home theater.
•
Make sure that no disc is inside the
disc compartment.
EN
31
Advertisement
Table of Contents
