ICStation RGB LED Bluetooth Amplifier Christmas Tree DIY Kit Manual

ICStation RGB LED Bluetooth Amplifier Christmas Tree DIY Kit
1.Description:
It is a RGB LED Bluetooth Amplifier Christmas Tree DIY Kit with RGB LED flashing in various
automatic flashing effects.
2.Feature:
RGB LED Flashing Automatically. It contains 39 3mm RGB LED which can automatic flashing,
gradient and showing different colors. Highly simulated Christmas tree with slightly curved PCB
board.
Bluetooth Amplifier. It comes with a Bluetooth audio receiver with a 3W amplifier. So user can
use it as a audio player which can play music for phone/ipad/laptop and so on. Support switch
Prev/Next/V+/V- and play mode. It is not only suitable for Christmas, but can also be used with
other festivals as well as on-site daily events.
FM/U-disk/TF-Card Music. In Bluetooth receiver, it not only support Bluetooth, but as can
input audio from U-disk and TF card which achieve offline independent work without phone. It
can also be used as a FM radio that playing currently acceptable stations. Note: It need connect a
earphone in FM mode.
Acrylic Transparent Board. The 3mm thick acrylic sheet, transparent and strong, can not only
support the structure of the entire Christmas tree, but also make its appearance more stable and
beautiful.
DIY Soldering Kit which comes with various components. User need to install each component
by hand. It not only can exercise and improve soldering skills, but also increase the interest in
electronic technology. Great for electronics hobbyists, beginners, school and home education.
3.Parameter:
Product Name:RGB LED Bluetooth Amplifier Christmas Tree DIY Kit
Work Voltage:DC 4.5V-5.5V
Work Current:1A(Max)
LED Type: Flashing automatically
Audio Source: Bluetooth/FM/U-disk/TF Card
Speaker Power: 3W 4ohm
Audio Output: AUX for loudspeaker/earphone
Work Temperature:-20℃~85℃
Work Humidity:5%~85%RH
Size(Installed):74*74*200mm
4.Introduction:
Input work power supply from black 3.5*1.3mm Power Socket by USB wire.
Turn ON/OFF Toggle Switch and then the LED start to flashing automatically.
MODE button: Press to switch audio input mode from Bluetooth/FM/U-disk/TF Card.
P/P button: Play/Pause music. Start to automatically search for stations at FM Mode.
NEXT button: Short press to switch next music. Keep press to decrease volume.
1
https://www.icstation.com/
orders@icstation.com