Summary of Contents for M-system Mastro ADC0004
- Page 1 019_03 04/2006 Instructions for installation, use and maintenance ELECTRIC FRYER ADC0004 ADC0005 ADC0006 AEC0001 · AEC0002 AEC0003 · AEC0004 AEC0005 · AEC0006...
- Page 2 INDEX Models and dimensions page Technical data Installation instructions Installation Legal and technical requisites Installation Wiring Unipotential Using the appliance Ignition Emptying the bath Cleaning and taking care of the appliance What to do if not using the appliance for a long time What to do if something goes wrong Maintenance WEEE Directive...
- Page 3 Dimensions AEC00001 AEC00003 / AEC00005 400 x 900x 270 400 x 900x 270 / 530 weight approx.50 kg weight approx.59 kg / 62 kg AEC00002 AEC00004 / AEC00006 600 x 900x 270 800 x 900x 270 / 530 weight approx.95 kg weight approx.109 kg / 120 kg Main switch Pilot lamp (voltage)
- Page 4 Dimensions ADC00004 400 x 900x 875 400 x 900x 875 weight approx.64,5 kg weight approx.70 kg / 73 kg ADC00005 ADC00006 600 x 900x 875 800 x 900x 875 weight approx.104 kg weight approx.120 kg / 131 kg Main switch Oil outlet drive Pilot lamp (voltage) Pilot lamp (resistance)
-
Page 5: Technical Data
CAT/KAT GAS/GAZ Technical data II2H3B/P P mbar II2H3+ P mbar The data plate is located on the rigth hand side of the II2H3+ P mbar II2L3B/P P mbar 0051 control panel and contains all the data needed for connecting II2ELL3B/P P mbar TIPO/TYPE II2E+3+... -
Page 6: Installation Instructions
INSTALLATION INSTRUCTIONS Installation Before beginning installation, remove all packaging from the appliance. Some parts are protected with an adhesive Installation, start-up and maintenance should only be car- film which should be carefully removed. ried out by expert personnel. All work required to install Any remnants of glue should be thoroughly cleaned using the appliance should be carried out in compliance with all suitable substances such as benzine. -
Page 7: Using The Appliance
USING THE APPLIANCE Warning! CLEANING AND TAKING CARE OF THE MACHINE - Beware of inexpert handling! - Old and dirty oil or frying fat can represent a real fire Warning! hazard; make sure only new oil or frying fat are used each time you start frying. - Page 8 THE 2002/96/EC DIRECTIVE (WEEE): information to users This informational note is meant only for owners of equipment marked with the symbol shown in Fig. A on the adhesive label featuring the tech- nical specifications applied on the actual pro- duct (the label also giving the serial number). This symbol indicates that the product is classified, ac- cording to the regulations in force, as an item of electrical and electronic equipment and conforms to EU Directive...
-
Page 9: Wiring Diagrams
Wiring diagrams ADC00004 AEC00001 - AEC00003 - AEC00005 11 12 13 400 V 3N~ L1 L 2 L 3 N 11 12 13 L1 L 2 L 3 230 V 3~ Bôite à bornes Bôite à bornes de commutation Interrupteur Microinterrupteur Contacteur de sureté... - Page 10 Wiring diagrams ADC00005 - ADC00006 AEC00002 - AEC00004 - AEC00006 400 V 3N~ L1 L 2 L 3 N Y X Z L1 L 2 L 3 230 V 3~ Line input terminal board Commutating terminal board Switch Microswitch Safety contactor Adjusting contactor Adjusting thermostat Safety thermostat...
- Page 11 WARNING THE MANUFACTURER CANNOT BE HELD RESPONSIBLE FOR ANY INACCURACIES IN THIS BOOKLET DUE TO COPYING OR PRINTING ERRORS. DUE TO ITS POLICY OF CONTINUAL PRODUCT IMPRO- VEMENT, THE MANUFACTURER RESERVES THE RIGHT TO MAKE ANY CHANGES DEEMED NECESSARY. THE MANUFACTURER CANNOT BE HELD RESPONSI- BLE IF THE INSTRUCTIONS CONTAINED IN THIS MA- NUAL ARE NOT OBSERVED.
Need help?
Do you have a question about the Mastro ADC0004 and is the answer not in the manual?
Questions and answers