Siemens WM12Y740IT Instruction Manual page 17

You can use the displayed presettings or adjust the selected
programme optimally to the items of washing by changing the
presettings or selecting additional settings/options.
Ø
Changing the Temperature, Spin, Finish in. Refer to
~ Page 28:
e.g. selecting and changing the Temperatura (Temperature):
c
70
60
°C
50
b
The arrows on the display panel indicate which buttons are
used to change the settings. The settings are active without
acknowledgement and are displayed in the main menu.
²
– If the buttons are held down, the set values automatically run
through.
– The respective programme duration is displayed by selecting
the programme. The programme duration is adjusted while
the programme is running if the programme duration requires
changing, e.g. due to changes in the programme settings/
options, foam detection, unbalanced load detection, the load
or soiling.
Ø
ecoPerfect
for saving energy with a comparable washing effect to the
standard programme. When selected, the display lamp is lit.
Ø
turboWash
for a shorter wash time with a comparable washing effect to
the standard programme. Observe maximum load.
~ Page 23 When selected, the display lamp is lit.
Ø
Sistema antimacchia
Overview of all stains ~ Page 30
Do not let stains dry. Remove solid substances beforehand.
Arrange items of washing as usual and load washing
machine. Select the programme. Select a stain type
(depending on the selected programme).
c
1400
B
b
¦
:
G
:
ã
(Anti-stain system).
c
2:31
h
b
c
17